Oce PRISMAproduction - General

Configuration Printer
A29247-X6-X-6-7670 181
6.14.7 General
’Data Format’
Specification of the data type, which is accepted by the printer (only active if FTP-mode prin-
ter is selected):
• AFPDS / Linedata
• HP PCL
• Postscript
• Portable Document Format (PDF)
The available data types depend on the printer device type:
The AFP printer driver accepts only AFP and line data (the list box is grey). FTP and LPT
accept all kinds of data types.
’Speed’
Printer speed in ppm (pages per minute)
The speed setting is required to check if the printer usage is covered the the class, which
is available via PRISMAproduction 3.0 license. The printer speed is also requested from the
printer directly and this value overwrites automatically the speed, which was specified man-
ually. The "Dummy" and TrueProof-printers are not checked for the speed license.
’Resolution’
Resolution of the printer
• 240 dpi
• 300 dpi
• 600 dpi
• MRM (Multiple Resolution Mode)
’Toner Stations’
Count of installed toner stations in the logical printer, e.g. Twin = 2 stations, Triplex=3, ...
The symbol of selected printer model is displayed only for informtaion. The same image is
used in the "Printer Pool" window.