Command Line Interface Spsprt-to-JobTicket Converter
A29247-X2-X-8-7670 309
Note: Using the –file option instead of the normal file name parameter (last parameter of
spsprt command) is discouraged because the standard plausibility check is not ex-
ecuted for the last parameter of the spsprt command. Such a mistake in the last pa-
rameter will not be found by spsprt if –file is used. This option is only supported for
compatibility reasons.
9.2 Spsprt-to-JobTicket Converter
This program can be used for converting ‘old’ (x)spsprt job files into job ticket files which
can be used by the Print Job Manager.
The conversion is started with the same command line options as the normal spsprt com-
mand. The converted job ticket is printed on the screen and can be redirected to a file using
the ‘>’ sign:
job2tic -option spsprt.jobfile > jobticket.TIC
To Next Page
Loading...
