PRISMA SNMP Interface PRISMAproduction Network Functions
222 A29247-X2-X-8-7670
This table shows the object identifiers, a short description, the type and the accessibility of
the managed objects supported by the PRISMA SNMP. The SNMP agent is based on the
public domain UCD-SNMP Version 4.1.1. It supports protocol Data Units based on version
1 of the SNMP protocol standard definition.
The interface offers connectivity to three different kinds of applications:
1. SNMP network management systems
2. Program API to the information listed in the table above
3. Command line interface to the information listed in the table above
For documentation on points one and two, refer to the descriptions of these applications.
The command line interface for Caldera Linux systems includes the following SNMP com-
mands:
• snmpget
• snmpwalk
• snmpset
For accessing the managed objects, you need the NameForms or the object identifiers of
the objects you want to access. In the table below the NameForms and their object identi-
fiers are listend:
To Next Page
Loading...
