’Job Parameter’ Section Print Job Manager
238 A29247-X3-X-6-7670
‘Printer’ One printer selected from a list of all the printers in the ODS network.
Select the printer on which the job is to be printed.
Warning: Your choice will have an influence on PJM menu functions be-
cause some settings depend on the selected printer.
If the option ’Access Each Printer of a Cluster’ is enabled in the ’System’
dialog under ’Configuration’ -> ’System’, in addition to the cluster names
all single printers within a cluster are selectable from this list. Thus jobs
can be transferred to single printers, to single printers within a cluster or
to a cluster. If you select a single printer, tho job will be printed only on
this printer. If you select a cluster of the type ’printer’, the job will be print-
ed on any available printer in this cluster, which matches the require-
ments of the job. If you select a cluster of the type
’printer_jobs_splitting’, the copies of the job will be distributed to the
printers of the cluster (see ’Configuration’ -> ’Cluster’).
In adddition to the printers configured in the system, logical printers
<Any printer> are offered in this list. If you configure printers with the
resolution of 600, 300 or 240 dpi, logical printers <Any xxx dpi printer>
are offered, which match the resolution configured.
If you select <Any printer>, the job will be executed on any printer avail-
able (which has the resolution MRM). If you select <Any xxx dpi printer>,
the job will be printed on a printer which matches the resolution.
If the printer name starts with ’TP...’, a TrueProof printer is configured in
the System.
‘Job Queue’ Sets the job queue of the print job. Which job queues are listed depends
on the valid job queues defined for the selected target printer.
You define Job queues under ’Configuration’ -> ’Job Queues’. Under
’Configuration’ -> ’Printers’ the job queues are assigned to printers.
To Next Page
Loading...
