Oce PRISMAproduction - Page 304

PJM in Command Line Mode Print Job Manager
292 A29247-X3-X-6-7670
Print_Mode= Normal/Two up/Identical copies/Invers
Two up/Default
Default: Default
Job Attributes -> Print
Outtray= Output Tray
Default/Printer Default/A/B/C/D/...
Default: Default
Job Attributes -> Print
Intray= Input Tray
Default/Printer Default/1/2/3...
Default: Default
Job Attributes -> Print
POD and APA only
For LCDS use JSL STOCKS/
SCT technique
Print_Range= List of print ranges which are to be
printed, separated by semicolons
i.e. -5;10;60-80;
1:5-10; 2:1;...
Job Attributes -> Print
Print_Form= Name of a form
max. 8 characters
Job Attributes -> Print
Note for LCDS:
If 'PrinterTyp=SCT' the form is set
inernally.
If 'PrinterTyp=FanFold/ MediaN-
ame’ the Print_Form-Parameter
may be used.
Store= Store output in libraries
yes/no
Default: no
Job Attributes -> Store Output
POD only
St_Native= Store output as native file
yes/no
Default: no
Job Attributes -> Store Output
POD only
St_PFL= Store output in PFL
yes/no
Default: no
Job Attributes -> Store Output
POD only
St_Preprint= Store output in preprint cache
yes/no
Default: no
Job Attributes -> Store Output
POD only
St_Resource= Store output as resource
yes/no
Default: no
Job Attributes -> Store Output
POD only
St_Resource_Dest= Type of destination where output is to
be stored as a resource
Header/Target/Overlay/Variable/
Marks/Merge/Mapping/Tiff/Ps/Pdf
Default: Target
Job Attributes -> Store Output
POD only
Parameter General Description
Options and Syntax
Default
Description of the correspond-
ing GUI option
additional notes