Job Queue Information Command Line Interface
320 A29247-X2-X-8-7670
Command: splstat -s {Function} [Operand] [Operand] is used for changing
settings.
Overview of functions and operands:
Command Function Operand Operand Explanation
splstat -s copies Copy
count
Job Id Sets the copy count for the print job to
the specified value.
splstat -s jobcl Job class Job Id Sets the specified job class for the
print job.
splstat -s printer printer Job Id Change the destination printer for the
print job.
splstat -s range Page
range
Job Id Set the printing range for the print job
to the specified page range.
splstat -s deljob Job Id Deletes the print job with the speci-
fied spool Id.
splstat -s lock Job Id Sets the status of a job to
‘Halted'
splstat -s release Job Id Sets the status of a job to
‘Ready to print’.
splstat -s express Job Id Set 'Express' right for the job.
To Next Page
Loading...
