PRISMAproduction Explorer Job Lists
A29247-X3-X-6-7670 79
Filter menu
You can define and store filters to restrict the scope of the list to jobs matching given criteria.
See chapter “Filters” below.
Edit menu
View menu
Tooltip of a job
If you position the mouse pointer on a job, a tooltip pops up giving information on the job
(e.g. starttime).
’Select all’ Selects all the jobs.
’Deselect all’ Deselects all the jobs.
’Update’ The view of the job list is updated permanently.
’Freeze’ The current status of the job list is frozen to make modifications
more comfortable.
’Weak command locking’ This setting has an influence on the availability of functions of the
menu- and toolbar, if more than one job is marked. If it is switched
off, a command in the menu- or toolbar must be possible for all
marked job to be active. If ’Weak command locking’ is switched on,
a command must be excutable for only one of the marked jobs to
be active.
You can also enable a weak command locking if you press the shift
key.
To Next Page
Loading...
