Omron F3SG series User Manual

105
F3SG-R
User’s Manual
Chapter2 Setting Recovery
System Operation and Functions
E
2-26. Setting Recovery
The Setting Recovery function configurable with the Configuration Tool may increase risks. Make
sure the Responsible Person conduct a thorough risk assessment analysis before managing and
changing the settings. Unintended changes to the settings may cause a person to go
undetected, resulting in serious injury.
2-26-1. Overview
You can use the Configuration Tool to recover the F3SG-RA setting to the default factory setting.
Make sure the Position 8 of the DIP Switch is set to Configuration Tool Enabled to activate the settings by the
Configuration Tool.
Refer to Safety Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User’s Manual for more
information on setting this function by the Configuration Tool.
The Setting Recovery is not available for the F3SG-RE.
F3SG-RA Series X
F3SG-RE Series

Omron F3SG series Specifications

General

Type	Safety Light Curtain
Protection Rating	IP67
Connection	M12 connector
Detection Method	Infrared Light
Operating Temperature	-10°C to +55°C
Resolution	14mm, 25mm, 40mm
Standards	EN/IEC 61496-1, EN ISO 13849-1
Power Supply Voltage	24V DC ±10%