213
F3SG-R
User’s Manual
Chapter7 Troubleshooting
Appendix
E
7-1-1. Lockout State
7-1-1-1. Description
If F3SG-R detects any failure, it keeps safety output OFF and transitions to lockout state. Under
lockout state, the lockout indicators blink or are ON and other indicators blink based on the failure.
Solve the problems based on the table below.
Eliminate the cause of the problem. Then turn the power ON again or reset the lockout state by
providing a reset input to restart the F3SG-R.*
* The lockout reset function is not available for the F3SG-RE series. Turn the power ON again to
restart the F3SG-RE.
To Next Page
Loading...
