v
F3SG-R
User’s Manual
Introduction
E
Indications and Meanings for Safe Use
The precautions listed in this document indicated by alert symbols and statements must be followed for the
safe use of the F3SG-R. Failure to follow all precautions and alerts may result in an unsafe use or
operation.Thoroughly read this manual and understand the installation procedures, operation check
procedures, and maintenance procedures before using F3SG-R.
The following word and symbols are used in this document.
Meaning of Signal Word
Meanimgs of Alert Symbols
Alert Statements in this Manual
Make sure to test the operation of the F3SG-R after setting with DIP Switch to verify that the
F3SG-R operates as intended. Make sure to stop the machine until the test is complete.
Unintended settings may cause a person to go undetected, resulting in serious injury or death.
For users
The F3SG-R must be installed, configured, and incorporated into a machine control system by a
sufficiently trained and qualified person. An unqualified person may not be able to perform these
operations properly, which may cause a person to go undetected, resulting in serious injury.
Safety Precautions
Indicates an imminently hazardous situation which, if not avoided, is likely to result in
serious injury or may result in death. Additionally there may be severe property
damage.
Indicates a potentially hazardous situation which, if not avoided, will result in minor or
moderate injury, or may result in serious injury or death. Additionally there may be
significant property damage.
Indicates prohibited actions.
Indicates mandatory actions.
Indicates the risk of electric shock.
To Next Page
Loading...
Need help?
General
