Omron F3SG series User Manual

214
Chapter7 Troubleshooting
F3SG-R
User’s Manual
Appendix
7-1-1-2. Troubleshooting
Identify an error according to the combination of the indicators when the error occurs. See the following
troubleshooting tables to take measures.
Other sensor error
Cascading configuration error
Internal error
Communication error
External device monitoring error
DIP Switch setting error
Operating range selection setting error
Safety output error
Communication error
DIP Switch setting error
Blanking monitoring error
Cascading configuration error
Blink
Internal error
[Error Description]
[Error Description]
Communication error due to
power supply voltage or noise
Internal error due to power supply
voltage or noise
ON
OFF
EDM
COM
POWER
INTERNAL
LONG
CFG
Internal or Comunication
error due to noise
Safety output error due to power
supply voltage or noise
LOCKOUT
Blinking Once
LOCKOUT
Blinking Twice
LOCKOUT
Blinking Once
LOCKOUT
Blinking Twice
BLANK
Cap error
Other sensor error
TOP
COM
ON
OFF
INTERNAL
BTM
POWER
Combination of Indicators and Error Description
<Indicator status at lockout: Receiver>
Combination of Indicators and Error Description
<Indicator status at lockout: Emitter>

Omron F3SG series Specifications

General

Type	Safety Light Curtain
Protection Rating	IP67
Connection	M12 connector
Detection Method	Infrared Light
Operating Temperature	-10°C to +55°C
Resolution	14mm, 25mm, 40mm
Standards	EN/IEC 61496-1, EN ISO 13849-1
Power Supply Voltage	24V DC ±10%