Omron F3SG series User Manual

xvi
Introduction
F3SG-R
User’s Manual
2-5. PNP/NPN Selection 27
2-5-1. Overview 27
2-5-2. Factory Default Setting 27
2-5-3. Setting with DIP Switch 27
2-5-4. Setting with Configuration Tool 27
2-6. Self-Test 28
2-6-1. Overview 28
2-6-1-1. Self-Test details 28
2-6-1-2. Waveform of safety outputs 29
2-7. External Test 30
2-7-1. Overview 30
2-7-2. Factory Default Setting 31
2-7-3. Setting with DIP Switch 31
2-7-4. Setting with Configuration Tool 31
2-8. Lockout Reset 32
2-8-1. Overview 32
2-9. Interlock 33
2-9-1. Over view 33
2-9-2. Factory Default Setting 36
2-9-3. Setting with DIP Switch 36
2-9-4. Setting with Configuration Tool 37
2-10. External Device Monitoring (EDM) 38
2-10-1.Overview 38
2-10-2.Factory Default Setting 39
2-10-3.Setting with DIP Switch 39
2-10-4.Setting with Configuration Tool 39
2-11. Auxiliary Output 41
2-11-1.Overview 41
2-11-2.Factory Default Setting 42
2-11-3.Setting with DIP Switch 42
2-11-4.Setting with Configuration Tool 43
2-12. Muting 45
2-12-1.Standard Muting Mode 47
2-12-2.Exit-Only Muting Mode 57
2-12-3.Position Detection Muting Mode 63
2-12-4.Dynamic Muting 68
2-12-5.Factory Default Setting 69
2-12-6.Setting with DIP Switch 69
2-12-7.Setting with Configuration Tool 69
2-13. Override 71
2-13-1.Override at Normal Operation 72
2-13-2.Override upon Startup 74

Omron F3SG series Specifications

General

Type	Safety Light Curtain
Protection Rating	IP67
Connection	M12 connector
Detection Method	Infrared Light
Operating Temperature	-10°C to +55°C
Resolution	14mm, 25mm, 40mm
Standards	EN/IEC 61496-1, EN ISO 13849-1
Power Supply Voltage	24V DC ±10%