Panasonic FP0R - Programming Tools; Required Tools for Programming; Software Environment and Suitable Cable; Programming Tool Software

1-8
1.3 Programming Tools
1.3.1 Required Tools for Programming
1.Programming tool software
- The tool software can also be used with the FP
series.
- "FPWIN GR Ver.2" or "FPWIN Pro Ver.6" Windows
software is used with FP0R.
FP Programmer cannot be used.
2.PC connection cable
- A commercial USB cable (A: mini B type) is used for
the connection.
- A cable for connecting a PC (Mini-DIN 5-pin, D-sub 9-
pin) can be also used for the connection.
1.3.2 Software Environment and Suitable Cable
Standard ladder diagram tool software FPWIN GR Ver.2
Type of software
OS
(Operating system)
Hard disk capacity Product No.
FPWIN GR Ver.2
English-language
menu
Full type
Windows98
WindowsME
Windows2000
WindowsXP
Windows Vista
40MB or more
AFPS10520
Small type
AFPS11520
Upgrade version AFPS10520R
Note1) Ver.1.1 must be installed to install the upgrade version.
Note2) Ver.2.0 can be upgraded to Ver.2.1 or later free of charge at our web site
http://industrial.panasonic.com/ac/e/dl_center/software/
Use the latest version.
Note3) The small type can be used only for each series of FP-e, FPΣ, FP0 and FP-X.
Conforms to IEC61131-3 programming tool software FPWIN Pro Ver.6
Type of software
OS (Operating system)
Hard disk capacity
Product No.
FPWIN Pro Ver.6 English-
language menu
Windows2000
WindowsXP
Windows Vista

100MB or more AFPS50560
Note1) The small type and upgrade version is not available for Ver.6.
Note2) Ver.6.0 can be upgraded to Ver.6.1 or later free of charge at our web site
(http://industrial.panasonic.com/ac/e/dl_center/software/).
Use the latest version.