Panasonic FP0R - Using FP0 Programs with FP0 R PLC; FP0 Program Usage Modes on FP0 R; FP0 Program Conversion Process for FP0 R

vii
When Using FP0 Programs
The programs used on the existing FP0 can be used on the FP0R in the following 2 cases.
1. Using the programs in the FP0R specifications.
It enables to make maximum use of the performance and functions of the FP0R.
2. Using the programs in the same specifications as the FP0.
It enables to execute the programs in the same specifications as the FP0 (FP0 compatibility mode).
The points to take care when using the FP0 programs on the FP0R are described below in the above 2
cases.
- When using the programs in the FP0R specifications
- When using the programs in the same specifications as the FP0
When using the programs in the FP0R specifications.
As the FP0 programs cannot be used as they are, it is required to change the following 3 items for the
FP0 programs before downloading the programs into the FP0R.
1. Change in the model setting
Change the model for the FP0 programs to the one for the FP0R with a tool software.
2. Resetting of system registers
As the system registers will be initialized once the model setting is changed, reset the system registers if
necessary.
3. Modification of the programs
Depending on programs, they should be changed according to the specifications of FP0R.