Panasonic FP0R - Page 279

15-17
WR908 FP0R
Relay No.
Name
Description
R9080
MEWNET-
W0
PC(PLC)
link 1
trans-
mission
assurance
relay
Unit
No.1
Turns on when Unit No. 1 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9081
Unit
No.2
Turns on when Unit No. 2 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9082
Unit
No.3
Turns on when Unit No. 3 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9083
Unit
No.4
Turns on when Unit No. 4 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9084
Unit
No.5
Turns on when Unit No. 5 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9085
Unit
No.6
Turns on when Unit No. 6 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9086
Unit
No.7
Turns on when Unit No. 7 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9087
Unit
No.8
Turns on when Unit No. 8 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R9088
Unit
No.9
Turns on when Unit No. 9 is communicating properly in PC(PLC)
link mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link mode.
R9089
Unit
No.10
Turns on when Unit No. 10 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908A
Unit
No.11
Turns on when Unit No. 11 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908B
Unit
No.12
Turns on when Unit No. 12 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908C
Unit
No.13
Turns on when Unit No. 13 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908D
Unit
No.14
Turns on when Unit No. 14 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908E
Unit
No.15
Turns on when Unit No. 15 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
R908F
Unit
No.16
Turns on when Unit No. 16 is communicating properly in PC(PLC)
link 1 mode. Turns off when operation is stopped, when an error
occurs, or when not in the PC(PLC) link 1 mode.
A: Available, N/A: Not available