15-30
FP0R (A: Available, N/A: Not available)
Address Name Description
DT90124
COM SEND/RECV
For details, refer to Programming Manual
(F145 and F146).
N/A N/A
DT90126
Forced ON/OFF
operating station
Used by the system N/A N/A
DT90127
to
Not used - N/A N/A
DT90140
MEWNET-W0
PC(PLC) link 0 status
The number of times the receiving operation
is performed.
A N/A
DT90141
The current interval between two receiving
operations: value in the register x 2.5ms
DT90142
The minimum inerval between two receiving
operations: value in the register x 2.5ms
DT90143
The maximum interval between two receiving
operations: value in the register x 2.5ms
DT90144
The number of times the sending operation is
performed.
DT90145
The current interval between two sending
operations: value in the register x 2.5ms
DT90146
The minimum interval between two sending
operations: value in the register x 2.5ms
DT90147
The maximum interval between two sending
operations: value in the register x 2.5ms
DT90148
MEWNET-W0
PC(PLC) link 1 status
The number of times the receiving operation
is performed.
A N/A
DT90149
The current interval between two receiving
operations: value in the register x 2.5ms
DT90150
The minimum inerval between two receiving
operations: value in the register x 2.5ms
DT90151
The maximum interval between two receiving
operations: value in the register x 2.5ms
DT90152
The number of times the sending operation is
performed.
DT90153
The current interval between two sending
operations: value in the register x 2.5ms
DT90154
The minimum interval between two sending
operations: value in the register x 2.5ms
DT90155
The maximum interval between two sending
operations: value in the register x 2.5ms
DT90156
MEWNET-W0
PC(PLC) link 0 status
Area used for measurement of receiving
interval.
A N/A
DT90157
Area used for measurement of sending