4.8 Extension Programming
DIL 1:N Extension and Delayed Ringing — Day / Night (contd.)
603-604
4-124 System Programming
Conditions • An extension can be assigned as the destination of as many outside lines
as required.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks or all outside lines to one selection, press the key
in step 3 or step 4. In these cases, the display shows the contents
programmed for Jack 1 or for outside line 1.
• There are six notification methods:
(1) Immediate ringing: rings immediately
(2) 1 ring delay
(3) 3 ring delay
(4) 6 ring delay
(5) No ring: only the indicator flashes
(6) Disable: no incoming call
• When you change the jack number by pressing NEXT or PREV, the
outside line number is not changed. Example #3-1:CO3.....Press
NEXT.....#3-2:CO3
Feature References Section 3, Features
Direct In Lines (DIL) Ringing, Delayed
Night Service
To Next Page
Loading...
