114 Configuration Tab
Command queue
execution
a
Supplied Activated means commands should be executed when
they arrive to the physical library.
Frozen means commands should be executed only
after the library will be activated again.
Number of storage Supplied Number of available storage slots.
Number of I/E slots Supplied Number of available mailbox slots.
Number of drives Supplied Number of available drives.
Number of cartridges Supplied Number of available cartridges.
Remove Click Remove the physical library.
Add new Partition Click Add new partition. Refer to C
reate Partition on page
127.
Freeze Click Freeze command queue execution.
Activate Click Activate command queue execution (after freeze).
Reset Alarm flag Click Remove Alarm flag (active only when the library is in
Alarm state).
Refresh Alarm flag Click Refresh Management GUI for Alarm.
Help Click Open online help for the current pane.
a. The Freeze command queue execution feature currently is implemented for the Scalar 10K DA libraries only.
CAUTION
If the physical library properties are changed (for example, another drive
added), the Scan SCSI Bus operation does not
update the existing library
properties. The update can be done only by the Teach command from the
device operator panel.
CAUTION
When new drive(s) and/or insert/eject slot(s) have been added to the physical
library that already contains a working configuration (logical library, clients,
etc.), the admin must check whether the configuration of partitions is still
correct. Refer to Partition
on page 119.
The operation of assign-unassign partitions may be required. Refer to Assign
Partition on page 108 and Assign Partitions on page 38.
CAUTION
If the physical library is removed, all partitions, media rules, and offline
cartridges are lost. Library delete confirmation is required.
Field/Button Icon Operation Description
To Next Page
Loading...
Need help?
General