76 Library Tab
This test moves the cartridges of the selected media type either from Storage to Storage, or from Storage
to I/E (and vice versa), or from I/E to I/E. Any single operation is move command (refer to Move Cartridge
to Element on page 80), the cartridge and target slot are selected at random by media type.
Random Mount Test
Figure 53 Random Mount: Select Media Type
This test mounts the cartridges of the selected media type and dismounts them from drives. Any single
operation is mount or dismount command, the cartridge and target drive are selected at random by media
type.
Cartridges
In the Select Components area of the pane, selectable Cartridges are displayed. Clicking the expand/
collapse button causes an element expansion.
Figure 54 Cartridges
To Next Page
Loading...
Need help?
General