Scalar DLC Reference Guide 81
Select the slot and press OK to complete the move operation. Press Cancel to exit without executing a
move.
Drag and Drop Operations
Drag and Drop operation mostly serves the same function as the Import, Export, Mount, and Dismount
buttons. However there are some extestions (described below).
Note
Only available slots are shown that means they are to be compatible, empty, and not
marked as a home position for another cartridge. The destination and target slot can be
the same element.
For the 3590 cartridge the target can be only 3590-compatible slot; refer to Storage
Types on page 247, Mailbox Types on page 248, and Drive Types on page 249).
Drag source Source Status Drop target Operation
Cartridge Mounted Library Dismount
Cartridge Stored Drives Generic Mount
Cartridge Stored Drive Mount to the specified drive
Cartridge Mounted or stored in
Storage slot
Mailbox Export to the specified Mailbox
Cartridge Stored in I/E slot Mailbox Move to the specified Mailbox, the cartridge
remains stored
Drive slot Occupied Mailbox Export the cartridge to the specified Mailbox
Drive slot Occupied Cartridges Dismount drive
Drive slot Occupied Library Dismount drive
Drive slot Occupied No target Dismount drive
Mailbox - Library Import the entire contents of the Mailbox
To Next Page
Loading...
Need help?
General