Scalar DLC Reference Guide 45
The Ticket Summary dialog contains selected information from the previous dialogs. The wizard assembles
the data and requires a verification.
Figure 31 Ticket Summary
Create Rule
The Scalar DLC software contains rules for monitoring system events either by sending notification via email
or directly to the Management GUI. In addition, system rules are generated by the Scalar DLC software
itself. The user can define rules that will operate in a similar manner. See Table 8
for the detailed description
of the events and matching rules configuration.
Name Operation Description
Summary Supplied Be sure that the data entered from the previous dialogs is correct.
Note
The Create button is disabled while the ticket is in the creation process. During this
period, the data is being integrated into the ATAC Calls pane.
Note
In the table that follows, (Any) means selection “Any,” (None) means selection “None”,
(#) means exact selection (for example, Library1, or Client2).
For the details on Error code, if any, refer to Error Codes
on page 251.
Table 8 Event Specification
Event Event Group Specific Event
Error
code
Physical
Library
Logical
Library
Client
Start
supervisor
Statistical SDLC supervisor has
been started
0 None None None
Stop
supervisor
Statistical SDLC supervisor has
been stopped
0 None None None
To Next Page
Loading...
Need help?
General