Quantum Scalar 1000

156 Configuration Tab
ROBAR
Figure 113 ROBAR Interface Pane
Note
The new SCSI Client is functional immediately after creation. No Scalar DLC service
restart is required.
Note
Because of interface properties, only one SCSI Client can be assigned to the single
LUN.
CAUTION
After the client is assigned to the LUN 0 of any target, all other clients
assigned to the non-zero LUNs of this target are activated.
Field/Button Icon Operation Description
Port Enter The port to establish the ROBAR client TCP/IP connection(s).
Note that the default value of 0 is not
valid.
Update Click Save port properties after edit.
Add new
Client
Click Pop-up client creation window appears. Refer to Create
ROBAR Client on page 160.