Scalar DLC Reference Guide 69
• Operator Panel Tab. Executing operator panel commands from a remote console. Refer to
O
perator Panel Tab on page 195.
• Cluster Tab. Viewing and changing the cluster settings. Refer to C
luster Tab on page 198.
• SNMP Tab. Managing the SNMP settings. Refer to S
NMP Tab on page 199.
The details for each tab are described in the appropriate sections.
GUI Log
The GUI Log is located at the bottom portion of the screen. It shows the list of messages that reflects the
operations executed in the Management GUI during the current session. Use the scroll bar if the list is large
or the message is long.
Figure 47 GUI Log
Note
The GUI Log does not reflect the operations executed from a client side.
Icon Description
Indicates that the current message contains an information message.
Indicates that the current message contains a warning message.
Indicates that the current message contains an error message.
To Next Page
Loading...
Need help?
General