Scalar DLC Reference Guide 251
Error Codes
The Error Codes described in the Table 35 are used with the Rules Tab on page 179 and ATAC Calls Tab
on page 189.
Table 35 Error Codes
Error Code Description
0 No error
200 NULL
201 NULL
202 RPC problem
203 NULL
204 Unable to Recover
205 The robot is not ready (or switched off logically)
206 Request link failure
207 Invalid robot number
208 Invalid arguments
209 Invalid client name
210 Invalid request id
211 The request was canceled
212 General software failure
213 Invalid pool name in scr_info (use with scr_info only!)
214 The cartridge is in use
215 The accessor couldn't put a cartridge - inventory dst cell
216 The accessor couldn't get a cartridge - inventory src cell
217 General hardware problem
218 Physical problem with cartridge
219 Physical problem with drive
220 Unrecoverable hardware problem
221 The accessor couldn't put a cartridge and rejected it to IE station - inventory dst cell,
update IE station cells
222 The source cell is empty - update src cell, retry?
223 The destination cell if full - update dst cell, retry?
224 The door was opened and closed - do a complete inventory, retry
225 The insert/eject station was opened and closed - update IE station cells, retry
226 Unexpected hardware failure - retry
To Next Page
Loading...
Need help?
General