134 Configuration Tab
Clients Tab
Clients connect to the Scalar DLC software through various interfaces. This release of Scalar DLC software
supports application-based DAS, ROBAR, and SCSI clients. A host software application client connects
through the DAS or ROBAR interface, or SCSI.
The selected client area of the pane indicates a list of clients. When a client is selected from the list, the
client is highlighted.
Table below shows the icons that represent the Clients tab objects.
The three compatible client interfaces are:
• DAS. Refer to D
AS on page 135.
• SCSI. Refer to SCSI
on page 146.
• ROBAR. Refer to ROBAR
on page 156.
Name Icon Description
Client interface A client interface (DAS, SCSI, and ROBAR).
Client (online) This icon indicates a client that is currently online.
Client (offline) This icon indicates a client that is currently offline.
Note
DAS and SCSI clients are considered online when a client-sent command is being
executed. ROBAR client is considered online when a TCP/IP connection with the client
host is established.
To Next Page
Loading...
Need help?
General