Scalar DLC Reference Guide 149
Sequence Do not check A commands sent by client without sequence option
will be executed as they are ready. The system will not
wait until the previous client command is finished.
Number of reserved
storages
Supplied The number of storage slots reserved by the client.
Number of reserved
I/E slots
Supplied The number of mailbox (I/E) slots reserved by the
client.
Number of reserved
drives
Supplied The number of drives reserved by the client.
Unreserve All Click De-allocates all slots currently reserved by the client
(storage, I/E, and drives).
Update Click Save client properties after edit.
Remove Click Remove the client.
Help Click Open online help for the current pane.
CAUTION
The SCSI Client connection parameters (port-target-LUN) cannot be modified.
It is only possible to remove the client, or change its name and the assigned
library.
Note
Because of interface properties, only one SCSI Client can be assigned to the single LUN
of the specified SCSI Target.
CAUTION
After the client is assigned to the LUN 0 of any target, all other clients
assigned to the non-zero LUNs of this target are activated.
Field/Button Icon Operation Description
To Next Page
Loading...
Need help?
General