Scalar DLC Reference Guide 171
Field/Button Icon Operation Description
LUN ID Supplied LUN ID (internal).
Name Enter LUN name. Contains ‘LUN’ + LUN Number.
LUN Number Enter The LUN SCSI ID (external, seen by SCSI initiator).
Vendor ID Select Vendor ID, as will be seen by the SCSI Initiator.
Product ID Select Product ID. The format of the data transferred from/to
the SCSI initiator:
Firmware Revision Enter The firmware revision level, short form.
Full Firmware
Revision
Enter The firmware revision level, complete.
Create Click Create SCSI LUN
Cancel Click Cancel creation.
Help Click Open online help for the current pane.
CAUTION
The LUN creation is not possible if the target already contains the maximum
number of LUNs.
Note
The newly created LUN will not be active until there is a SCSI client assigned to this LUN.
Moreover, the LUN requires the target to be active, and the target becomes active only
when the SCSI client is assigned to the LUN 0.
To Next Page
Loading...
Need help?
General