Quantum Scalar 1000 User Manual

6-26 Processing Media
6-00054-02 Rev A
Step 3 Enter the number of cells that may contain cleaning
tapes in the I/E station (Insert Range), and Accept.
See Figure 6-7.
Figure 6-7 Enter Target Dialog
Step 4 Enter the Target Coord (the starting address of
enough consecutive empty storage cells to contain
all of the cleaning tapes in the specified I/E station
range), OR Element, and Accept.
See Figure 6-8.
Figure 6-8 Current Dialog
Step 5 Enter Current (how many times the cleaning tape
has been used), Max (how many times the cleaning
tape can be used before it must be ejected), Accept.
If several cleaning tapes are inserted, all get the
same usage setup. When the insert operation
completes the Command Complete Dialog
appears. See Figure 6-9.
Figure 6-9 Command Complete Dialog
Ejecting a Cleaning Cartridge
You can eject a cleaning cartridge from the library three
different ways:
Enter TARGET
Coord: S 01< 1 A 01
OR Element: 00001
Accept : N
Note
If the tape type is
known to the library,
that type is displayed
on the Operator LCD,
if not, the type must
be selected.
Type:LTO
Current Usage: 000<
Maximum Usage: 050
Accept: N
Note
Maximum used:
SDLT/DLT = 20
LTO = 50
AIT = 35
Requested command is
now complete.
Tapes inserted: 001

Quantum Scalar 1000 Specifications

General

Brand	Quantum
Model	Scalar 1000
Category	Storage
Language	English