Commands Menu 5-45
22 June 2004
Insert/Eject Submenu
Path: Main Menu Commands Menu Insert/Eject
Submenu
Use the Insert/Eject Submenu to insert or eject a clean
tape into or out of the library. See Figure 5-56.
Figure 5-56 Insert/Eject Submenu
Depending on your selection, you have the following options:
• Insert Screen
• Insert Clean Tape Dialog on page 5-47
• Eject Dialog on page 5-52
• Eject Clean Tape Submenu on page 5-55
Insert Screen
Path: Main Menu Commands Menu Insert/Eject
Insert Screen
Use Insert Screen to move all cartridges found in the
Insert/Eject stations to the first available empty storage cells.
See Figure 5-57. If there are cartridges in the Insert/Eject
station, the response screen appears. See Figure 5-57.
Figure 5-57 Insert Screen
The Current Source and Target elements are updated.
See Figure 5-58 on page 5-46.
Note
Use this option to
insert or eject
cartridge(s)
without host
intervention.
>Insert
Insert Clean Tape...
Eject
...
Eject Clean Tape
Insert in progress
Source: 1182
Target: 0000
To Next Page
Loading...
