Overview 4-3
22 June 2004
4-
Overview
This chapter describes the Operator Panel, Scalar 1000 start
and shutdown procedures, and the Remote Management Unit
(RMU) operations and menus.
Using the Operator Panel
The Operator Panel is an interactive path between the
operator and the Scalar 1000. See Figure 4-1 on page 4-4.
Scalar 1000 operator can perform the following functions
listed below:
• Starting the Scalar 1000
• Shutting down the Scalar 1000
• Handling media
Refer to Inserting Media on page 6 and Ejecting Media on page
8 for media handling procedures. In the case of equipment
failures, the operator can perform media processing.
To Next Page
Loading...
