5-82 Menus and Commands
6-00054-02 Rev A
Changing the Password
Parameter Value
Security If the Security is to be changed,
refer to Switching Security From
Off to On on page 5-79 or
Switching Security From On to
Off on page 5-81.
Password Y to change LCD password
N to leave the LCD password
as it is
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter and the change
password parameter is enabled, the Change Password
Dialog appears. Otherwise, the changed parameters
continue to display but no action is taken.
Figure 5-111 Change Password
Parameter Value
Old Indicates the password to be
changed (0000–9999).
New Indicates what the password
will be changed to
(0000–9999).
Accept Y to accept changes
N to reject changes
Change Password
Old[0000] New[0000]
^
Accept: N
To Next Page
Loading...
Need help?
General