Setup Menu 5-77
22 June 2004
Host Dialog
Path: Main Menu Setup Menu Library
Submenu Host Dialog
Use the Host Dialog to view the type of host control and
partition state
See Figure 5-104.
Figure 5-104 Host Dialog
Parameter Value
Host type SCSI indicates SCSI control.
Partitioned The SCSI mode select
command sets or clears the
flag. It is displayed here for
information only. If set to Y,
the library will warn the
operator that moving media
within the library may corrupt
host application defined
partitions.
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Host type: SCSI<
Partitioned: N
Accept: N
Note
At present, only
SCSI control is
supported.
To Next Page
Loading...
Need help?
General