5-10 Menus and Commands
6-00054-02 Rev A
Mode Dialog
Path: Main Menu Mode Dialog
Use the Mode Dialog to change the library operating mode.
For example, you can set the library to Online or Offline.
See Figure 5-3.
Figure 5-3 Mode Dialog
Parameter Value
Mode Online
Offline
Shutdown
State Ready
Not Ready
Accept Y to accept changes
N to reject changes
When toggling between the Ready and Not Ready states,
the following two screens, refer to Figure 5-4 and
Figure 5-5 appear. When Shutdown is selected, the
Shutdown Screen appears. See Figure 5-6.
Figure 5-4 Ready Screen
Figure 5-5 Not Ready Screen
Offline ....... Ready
>Online
Ready
Accept: N
Note
If Shutdown is
selected for the
Mode parameter,
Shutdown is
automatically
displayed for the
State parameter.
Changing state to:
>READY<
Changing state to:
>NOT READY<
To Next Page
Loading...
