Overview 7-3
22 June 2004
7-
Overview
When a failure occurs, the Scalar 1000 firmware performs
error recovery and reporting. If the failure requires a service
call, Service Action Codes (SACs) are generated and posted to
the Operator Panel. When operator intervention is required, a
message is generated at the Operator Panel.
This chapter is organized as follows:
• Service Action Codes
• Operator Intervention Messages on page 7-23
• Error Log Codes on page 7-28
Service Action Codes
Table 7-1 lists the SACs and the corresponding actions that
can be performed by an operator.
To Next Page
Loading...
