Setup Menu 5-81
22 June 2004
Switching Security From On to Off
Parameter Value
Security Enabled N to disable LCD security.
(Y indicates that LCD security
is enabled.)
Change Password N indicates that the password
cannot be changed at this
point.
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter and the security
parameter is disabled, the Password Dialog appears.
See Figure 5-109.
If N is selected for the Accept parameter, the changed
parameters continue to display but no action is taken.
Figure 5-109 Password Dialog
Parameter Value
Password Indicates the password
(0000–9999)
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value and the
password is verified, the response screen appears. See
Figure 5-110.
Figure 5-110 Security is OFF Screen
Enter password :
[0000]
^
Accept : N
Security is now OFF.
To Next Page
Loading...
Need help?
General