Understanding Barcodes 6-13
22 June 2004
If barcode scanning labels are purchased, the individual
media labels are supported if they are acquired from the
sources listed in Table 6-2.
Applying Barcode Labels
All barcode labels are applied to the front of a cartridge.
Depending on the media type, barcode labels are either
stickers that adhere to the front of the cartridge or are cutouts
that slide into an indentation on the front of the cartridge.
See Figure 6-1 on page 14 for more information on applying a
barcode label.
Do not place a barcode label on top of a cartridge. Placing a
barcode label on top of a cartridge can cause an inventory to
fail.
Table 6-2 Supported Labels
Media Label Source
Model 8490
IBM 3590
NCTP
Tri-Code American Eagle Systems, Inc.
Tri-Optic Engineered Data Products
DLT-III Engineered Data Products
1703-0C
DLT-IV Engineered Data Products
1703-0D
DLT-IIIXT Engineered Data Products
1703-0E
SDLT Engineered Data Products
AIT Series (8 mm) Engineered Data Products
LTO Engineered Data Products
Caution
To Next Page
Loading...
