5-14 Menus and Commands
6-00054-02 Rev A
Mode Parms Dialog
Path: Main Menu Status Menu Library
Submenu SCSI Submenu Mode Parms Dialog
Use Mode Parms to view the current, default, or saved Mode
Parameter pages. For example, you can view an individual
element address or see if the library has Mixed-Media
Support enabled. See Figure 5-10 and refer to the Scalar 1000
SCSI Reference Manual for additional information about the
Scalar 1000 Mode Parameters.
Figure 5-10 Mode Parms Dialog
Parameter Value
Mode Parms Element Address
Mixed-Media
Parity
LCD
Type Current
Default
Saved
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, one
of the response screens appears. Refer to Figure 5-11 on
page 5-15. Otherwise, the changed parameters continue
to display but no action is taken.
Select Mode Parms:
ELEMENT ADDRESS <
and Type: CURRENT
Accept: N
To Next Page
Loading...
