5-40 Menus and Commands
6-00054-02 Rev A
If Y is selected for the Accept parameter value, the Target
Menu appears. See Figure 5-47. Otherwise, the changed
parameters continue to display but no action is taken.
Figure 5-47 Target Dialog
Parameter Value
Coord The first field displays the type
of cell (I for I/E Station, D for
Drive, S for Storage cell).
The second field displays
module numbers that can be
modified if EMs are present
(1–4).
The third field displays the
storage cell section (1–4), drive
bay (1–2), or IE station
number.
The fourth field displays the
column of the section (A–E),
drive port (A–B), or IE station
column
The fifth field displays the row
of the column.
(01–12 for ½-inch and
SDLT/DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Element Displays the element number
that corresponds to the
coordinate parameter
Accept Y to accept changes
N to reject changes
Enter TARGET
Coord: I< 01 1 A 01
OR Element: 01182
Accept : N
To Next Page
Loading...
Need help?
General