5-94 Menus and Commands
6-00054-02 Rev A
Schedule Immediate to allow drive
cleaning when requested by
the drive.
Delayed to schedule drive
cleaning for requesting drives
at the specified time.
Hours Hour (00–23) that cleaning
should start.
Min Minute (0–59) that cleaning
should start.
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, the screen
updates to reflect the changes. Otherwise, the changed
parameters continue to display but no action is taken.
Media Dialog
Path: Main Menu Setup Menu Cleaning
Submenu Media Dialog
Use the Media Dialog to specify the barcode number to
choose a cleaning tape of a specific media in the library.
See Figure 5-124.
A barcode mask is a valid, partial barcode label that can be
followed by a wildcard character (*). Barcode labels that
match the mask are marked as cleaning tapes. The barcode
mask must not match more than a maximum of 127 cleaning
tapes.
Figure 5-124 Media Dialog
Parameter Value
Media Type Selects one of the following
medium types:
3480/90E, 3590, NCTP,
DLT, SDLT, AIT, and IBM
LTO
Note
If Immediate cleaning
is selected, no time
values can be entered.
MediaType: LTO
BC : AAAAAA
^
Continue: N
To Next Page
Loading...
Need help?
General