2-18 System Description
6-00054-02 Rev A
Remote Management Unit
The factory-installed Remote Management Unit (RMU) in
each system uses a standard web browser for remote library
access.
The supported browsers are:
• Microsoft Internet Explorer version 4.0 and above
• Netscape Navigator version 4.7 and above
With an RMU, you are able to do the following:
• Update RMU firmware
• Update library firmware
• Access the library status
• Make configuration changes
• Access the library Operator Panel
• Access Scalar 1000 documentation
• Retrieve library command and event logs
The RMU supports Simple Network Management Protocol
(SNMP) version 2.0 and acts as an SNMP-server. The RMU
acquires Tape Alert 3.0 compatible information from the
library over the serial interface port and sends that
information to a SNMP manager. The RMU also detects a
power loss and generates a SNMP trap for notification.
To Next Page
Loading...
