5-36 Menus and Commands
6-00054-02 Rev A
Park
Path: Main Menu Commands Menu Park
Use Park to retract the gripper and return the Accessor to the
home position. The two Response Screens appear.
See Figure 5-40 and Figure 5-41.
Figure 5-40 Response Screen
Figure 5-41 Response Screen
Move Submenu
Path: Main Menu Commands Menu Move Submenu
Use the Move Submenu to position the gripper or scanner, or
to move media. See Figure 5-42.
Figure 5-42 Move Submenu
Depending on your selection, you have the following options:
• Position to Elem Dialog on page 5-37
• Move Media Dialog on page 5-39
Requested command is
now in progress ...
Requested command is
now complete.
Note
The Scalar 1000
must be Offline
and Ready to use
the commands
under the Move
Menu.
>Position to Elem...
Move Media...
To Next Page
Loading...
