Utils Menu 5-107
22 June 2004
Figure 5-142 Drive Range Dialog
Parameter Value
Drive Range Indicates the number of drives
to receive the firmware
update. Drives are in order of
their element address.
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, the
Response Screen appears. See Figure 5-143. Otherwise,
the changed actions continue to display but no action is
taken.
Figure 5-143 Response Screen
Parameter Value
Status Running indicates that the
current command is in
progress.
Completed indicates the
firmware on all the drives in
the cycle has been updated.
Canceled indicates the cycle
has been canceled.
ERROR! indicates an error has
occurred.
Cancel Y to cancel the cycle
N to continue the cycle
Drive Range: 01<
Accept: N
-UPDATE MICROCODE-
Cycle 1 of 3
Status: Running
Cancel: N<
To Next Page
Loading...
Need help?
General