5-50 Menus and Commands
6-00054-02 Rev A
The fourth field indicates the
column of the section (A–E),
drive port (A–B), or IE station
column.
The fifth field indicates the
row of the column.
(01–12 for ½-inch and SDLT/
DLT coordinates)
(01–14 for LTO coordinates)
(01–18 for AIT coordinates)
Element Displays the element number
that corresponds to the
coordinate parameter.
Accept Y to accept changes
N to reject changes
If Y is selected for the Accept parameter value, the Usage
Dialog appears. See Figure 5-66. If N is selected, the
changed parameters continue to display but no action is
taken.
Figure 5-66 Usage Dialog
Parameter Value
Type: Type of cleaning cartridge.
The library uses the installed
media type and drive type to
identify the type of cleaning
cartridge.
If the library identifies the
cleaning type, it automatically
displays on the control panel.
If there is more than one drive
type for the installed media
domain, then the user MUST
select the cleaning media type.
Type: SDLT
Current Usage: 000<
Maximum Usage: 000
Accept: N
To Next Page
Loading...
Need help?
General