Using the Remote Management Unit 4-17
22 June 2004
Downloading the SNMP MIB File
The SNMP Management Information Base (MIB) file allows
an SNMP management application to understand the SNMP
database and alerts generated by the RMU. If you are running
an SNMP management application and need the library MIB,
you can download it by means of the RMU.
To download the SNMP MIB file
Step 1 Click SNMP MIB in the left pane of the RMU
interface.
Step 2 Right-click Download SNMP MIB and click Save
Target As.
Step 3 Browse to your SNMP management server and
click Save.
You will need to load the MIB file into the SNMP
management application.
Configuring RMU Users
You can add unique users to the RMU. However, only one
administrator-level user is allowed, and it is automatically
given the user name admin.
Adding/Removing Users
Only the admin account can add or remove users.
To add or remove a user
Step 1 When prompted, log in as admin.
Step 2 Click the Configuration tab.
Step 3 In the User Configuration area, do one of the
following:
• If you are adding a user:
a. In the Management Action drop-down,
click Create User.
b. In Edit New, enter the new user name.
To Next Page
Loading...
