Quantum Scalar 1000 User Manual

7-24 Error Messages
6-00054-02 Rev A
->SYSTEM REBOOTED<-
CALL FOR SERVICE
SAC :%X
Code:0x%Y
%X = 2 digit hex
%Y = 8 digit hex
error modifier
->TOO MANY ERRORS!<-
CALL FOR SERVICE
SAC :%X
Code:0x%Y
%X = 2 digit hex
%Y = 8 digit hex
error modifier
->ATTENTION!<-
PM SERVICE DUE
Please call to
schedule maintenance
None
INTERVENTION NEEDED!
Please open and
close the I/E station
door again.
None
INTERVENTION NEEDED!
Unexpected door open
detected. Check all
doors for closure.
None
INTERVENTION NEEDED!
Single-ended device
detected on diff.
SCSI bus port 0.
None
INTERVENTION NEEDED!
Single-ended device
detected on diff.
SCSI bus port 1.
None
INTERVENTION NEEDED!
Check SCSI bus port0
connector and/or
termination.
None
INTERVENTION NEEDED!
Check SCSI bus port1
connector and/or
termination.
None
Table 7-2 Operator Intervention Messages (Continued)
Message Lines Variables

Quantum Scalar 1000 Specifications

General

Brand	Quantum
Model	Scalar 1000
Category	Storage
Language	English