R&S FSV3000 Series - Page 1005

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1005User Manual 1178.8520.02 ─ 01
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum:NEXT
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum:NEXT
This command moves a marker vertically to the next higher minimum level for the cur-
rent frequency.
The search includes all frames. It does not change the horizontal position of the
marker.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See " Search Mode for Next Peak in Y-Direction " on page 438
CALCulate<n>:MARKer<m>:SGRam:Y:MINimum[:PEAK]
CALCulate<n>:MARKer<m>:SPECtrogram:Y:MINimum[:PEAK]
This command moves a marker vertically to the minimum level for the current fre-
quency.
The search includes all frames. It does not change the horizontal position of the
marker.
If the marker hasn't been active yet, the command first looks for the peak level for all
frequencies and moves the marker vertically to the minimum level.
Suffix:
<n>
.
Window
<m> Marker
Using Delta Markers
The following commands control spectrogram delta markers.
Useful commands for spectrogram markers described elsewhere
The following commands define the horizontal position of the delta markers.
●
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 997
●
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 997
●
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 997
●
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 998
●
CALCulate<n>:DELTamarker<m>:MINimum:LEFT on page 998
●
CALCulate<n>:DELTamarker<m>:MINimum:NEXT on page 998
●
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK] on page 998
●
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt on page 999
Remote commands exclusive to spectrogram markers
CALCulate<n>:DELTamarker<m>:SGRam:FRAMe..........................................................1006
CALCulate<n>:DELTamarker<m>:SPECtrogram:FRAMe................................................. 1006
Analyzing Measurements (Basics)