R&S FSV3000 Series - Page 997

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
997User Manual 1178.8520.02 ─ 01
Positioning Delta Markers
The following commands position delta markers on the trace.
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT........................................................... 997
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT...........................................................997
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK].........................................................997
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt.......................................................... 998
CALCulate<n>:DELTamarker<m>:MINimum:LEFT............................................................ 998
CALCulate<n>:DELTamarker<m>:MINimum:NEXT............................................................998
CALCulate<n>:DELTamarker<m>:MINimum[:PEAK]..........................................................998
CALCulate<n>:DELTamarker<m>:MINimum:RIGHt........................................................... 999
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT
This command moves a delta marker to the next higher value.
The search includes only measurement values to the left of the current marker posi-
tion.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
Window
<m> Marker
Manual operation: See " Search Next Peak " on page 441
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT
This command moves a marker to the next higher value.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
Suffix:
<n>
.
1..n
Window
<m> 1..n
Marker
Manual operation: See " Search Next Peak " on page 441
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK]
This command moves a delta marker to the highest level.
In the spectrogram, the command moves a marker horizontally to the maximum level in
the currently selected frame. The vertical marker position remains the same.
If the marker is not yet active, the command first activates the marker.
Suffix:
<n>
.
Window
Analyzing Measurements (Basics)