EasyManua.ls Logo

R&S FSV3000 Series - Page 441

R&S FSV3000 Series
1268 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Common Analysis and Display Functions
R&S
®
FSVA3000/ R&S
®
FSV3000
441User Manual 1178.8520.02 ─ 01
Use Zoom Limits ← Search Limits
If activated, the peak search is restricted to the active zoom area defined for a single
zoom.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits:ZOOM[:STATe] on page 992
Deactivating All Search Limits ← Search Limits
Deactivates the search range limits.
Remote command:
CALCulate<n>:MARKer<m>:X:SLIMits[:STATe] on page 990
CALCulate<n>:THReshold:STATe on page 993
9.3.3.3 Positioning Functions
Access: [MKR ->]
The following functions set the currently selected marker to the result of a peak search
or set other characteristic values to the current marker value.
Peak Search ...............................................................................................................441
Search Next Peak ...................................................................................................... 441
Search Minimum ........................................................................................................ 442
Search Next Minimum ................................................................................................442
Center Frequency = Marker Frequency ..................................................................... 442
Reference Level = Marker Level ................................................................................ 442
Peak Search
Sets the selected marker/delta marker to the maximum of the trace. If no marker is
active, marker 1 is activated.
For spectrogram displays, define which frame the peak is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum[:PEAK] on page 994
CALCulate<n>:DELTamarker<m>:MAXimum[:PEAK] on page 997
Search Next Peak
Sets the selected marker/delta marker to the next (lower) maximum of the assigned
trace. If no marker is active, marker 1 is activated.
For spectrogram displays, define which frame the next peak is to be searched in.
Remote command:
CALCulate<n>:MARKer<m>:MAXimum:NEXT on page 994
CALCulate<n>:MARKer<m>:MAXimum:RIGHt on page 995
CALCulate<n>:MARKer<m>:MAXimum:LEFT on page 994
CALCulate<n>:DELTamarker<m>:MAXimum:NEXT on page 997
CALCulate<n>:DELTamarker<m>:MAXimum:RIGHt on page 998
CALCulate<n>:DELTamarker<m>:MAXimum:LEFT on page 997
Marker Usage

Table of Contents

Other manuals for R&S FSV3000 Series

Related product manuals