R&S FSV3000 Series - Page 1081

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1081User Manual 1178.8520.02 ─ 01
Parameters:
<Margin> *RST: 4.23 mm
Example:
HCOP:PAGE:MARG2:TOP 2
Manual operation: See " Margins " on page 554
HCOPy:PAGE:MARGin<device>:UNIT <Unit>
This command defines the unit in which the margins for the printout page are config-
ured.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<Unit> MM | IN
MM
millimeters
IN
inches
*RST: MM
Example:
HCOP:PAGE:MARG2:BOTT 2
Manual operation: See " Margins " on page 554
HCOPy:PAGE:ORIentation<device> <Orientation>
The command selects the page orientation of the printout.
The command is only available if the output device is a printer or a PDF file.
Suffix:
<device>
.
1 | 2
Printing device.
Parameters:
<Orientation> LANDscape | PORTrait
*RST: PORTrait
Example:
HCOP:DEV:LANG1 PDF
HCOP:PAGE:ORI2 LAND
Manual operation: See " Orientation " on page 554
HCOPy:PAGE:WINDow<n>:CHANnel:STATe <ChannelName>, <State>
This command selects all windows of the specified channel to be included in the print-
out for HCOPy:CONTent on page 1075.
Suffix:
<n>
.
irrelevant
Managing Settings and Results