R&S FSV3000 Series - Page 1075

Remote Commands
R&S
®
FSVA3000/ R&S
®
FSV3000
1075User Manual 1178.8520.02 ─ 01
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?.......................................................1084
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?.....................................................1084
SYSTem:COMMunicate:PRINter:SELect<device>........................................................... 1084
DISPlay:LOGO <State>
Activates/deactivates the printout of the Rohde & Schwarz company logo at the top of
each page.
Parameters:
<State> 1 | 0 | ON | OFF
1 | ON
Logo is printed.
0 | OFF
Logo is not printed.
*RST: 1
Example:
DISP:LOGO OFF
Manual operation: See " Print Logo " on page 547
HCOPy:ABORt
This command aborts a running hardcopy output.
Example:
HCOP:ABOR
Usage: Event
HCOPy:CONTent <ContType>
This command determines the type of content included in the printout.
This setting is independent of the printing device.
Parameters:
<ContType> WINDows | HCOPy
WINDows
Includes only the selected windows in the printout. All currently
active windows for the current channel (or "MultiView") are avail-
able for selection. How many windows are printed on a each
page of the printout is defined by HCOPy:PAGE:WINDow<n>:
COUNt on page 1082.
This option is not available when copying to the clipboard
(HCOP:DEST 'SYST:COMM:CLIP' or an image file (see
HCOPy:DEVice:LANGuage<device> on page 1078).
If the destination is currently set to an image file or the clipboard,
it is automatically changed to be a PDF file for the currently
selected printing device.
Managing Settings and Results